- Printed on: Bambu Lab X1 Carbon
- Using Filament: PLA
- Printed Without Supports
- Infil: 15%
- Walls: 2
- Layer: 0.2 mm
- Author: user_3340562595 (Maker World)
Used a layer-based color switch to give the pumpkin stem a green appearance. If you don’t have an AMS printer, you can pause the print at the point where the color changes and swap the filament to green manually. I’ll also provide a separate model where you can print the pumpkin and the stem as individual pieces, then glue them together.