- Printed on: Prusa MK4
- Using Filament: Silk PLA+ (Gold)
- Printed Without Supports
- Infil: 15%
- Walls: 2
- Layer: 0.2 mm
- Author: DrJones (Maker World)
Note: As with many print-in-place designs, this model requires a properly calibrated printer and filament combination. While the tolerance settings generally work for most users, some feedback indicates occasional issues with either gears sticking together or being too loose. In most cases, this can be resolved by tweaking the flow rate (also known as the extrusion multiplier). Decrease it slightly if the gears are fused together or increase it if the gears are too loose and tend to fall out.
